Shanghai electrical machinery group import & export Co., Ltd. (semc) can produce furnace from 0.1 ton to 60 tons. Our furnace can melt steel, aluminium, copper and other metals. About the furnace shell, we have steel and aluminium. For the tilting, we have hydraulic tilting and mechanical tilting. We can make furnace in different voltage and frequency. Below is a simple discription of our 1.5tons steel shell hydraulic furnace for steel in the condition of 380V, 60Hz.

The introduction of 1.5t energy-conservation medium frequency induction furnace.
(steel shell with magnetic yoke of hydraulic tilting)

1. Standard: Rated capacity of furnace approx. Steel 1.5t, rated power of medium frequency supply 1000kw.

2. Complete set equipment list: Furnace body 2 sets, hydraulic device 1set, water cooling cable (5m) 8sets, medium frequency supply cabinet 1set, capacitor cabinet (open type) 1set, low voltage control cabinet 1set, water tank of furnace body 1set, water tank of supply source 1set, water tank of capacitor cabinet 1set, hydraulic operation desk 1set, crucible 1set. Spare parts for free: Main control board 1piece, kk tube 1piece\kp tube 1piece.

3. Technical specification: 3-phase incoming voltage of medium frequency supply source 380V, 60Hz; Output voltage of medium frequency supply 1250V, power 1000kw, frequency 500Hz. Inductor inner diameter φ 780, pillar height1100.

4. Fit out components: Silicon-controlled rectifier (SCR) for kp tube 2000a/1400V; Kk tube 1200a/1600V. Breaker in the low voltage control cabinet 380V/2500a. Capacity of compensate capacitor 14000kilovar.

5. Furnace tilting type: Hydraulic operation, trustiness\facility.

6. Main control board: The control circuit used one single main control board, it designed to be whole, and reduced connecting line greatly, fixed reliability, avoid soft fault. This control circuit board is high degree of integration, especially the automatic adjusted α Angle, that keep output of power of the equipment always in best constant condition, the electric power can be saved by 3% than the same kind of product. Soft start-up and automatic frequency-sweep.

7. Customer service: All the costs of seller's experts go and work at abroad for return air tickets, accommodation and meals, will be paid by the buyer. During the debugging period, the buyer shall compensate the experts at USD 100 per day. The seller should be responsible for the scene testing. Seller should guarantee repair or change of the faulty components in 12 months, such as compensate capacitor\hydraulic device\breaker\and furnace shell (furnace leakage, disconnection electricity, less water, a sudden power failure problems arising from supply-side is not included in seller's responsibility ).
Shanghai electrical machinery import & export Co., Ltd